How much power does my vehicle have for its weight?
Power per tonne and an ideal energy-only acceleration comparison.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Power-to-weight ratio
66.7 kW/t
With 85% of 100 kW reaching the wheels and no resistance, the best 0 to 100 km/h takes 6.8 s.
- Horsepower per tonne
- 89.4 hp/t
- Mass per kilowatt
- 15 kg/kW
- Ideal 0–100 km/h time, no drag or traction limits
- 6.8 s
Formula
P / m; ideal t = ½mv² / Pwheel
Power per tonne and an ideal energy-only acceleration comparison.
How to use
- Enter rated power in kilowatts and the mass including passengers and load.
- Read the ratio in kW per tonne and mechanical horsepower per tonne.
- Change the assumed percentage of power reaching the wheels for the ideal time comparison.
How it works
Divide rated power by vehicle mass in tonnes to compare power-to-weight ratios. The inverse ratio is mass per kilowatt. Mechanical horsepower is converted through the shared unit library.
For the ideal time, kinetic energy E = ½mv² is divided by constant wheel power. Here v is 100 km/h converted to m/s and wheel power is rated power multiplied by the chosen efficiency.
The optional time is an energy-only comparison: constant wheel power from rest, no drag or rolling resistance, no traction limit, no shifting or power curve. It is not a predicted road-test time. The 85% efficiency is an editable scenario, not a measured drivetrain claim.
Worked example
What does the default scenario give?
- Use rated power 100 kW, vehicle mass including load 1500 kg, power reaching the wheels 85 %.
- Apply P / m; ideal t = ½mv² / Pwheel.
The primary result is 66.7 kW/t.
Sources
- OpenStax University Physics, vol. 1, §7.2 Kinetic EnergyUsed for: formula
- OpenStax University Physics, vol. 1, §7.4 PowerUsed for: formula
Frequently asked questions
Should I use curb weight or loaded mass?
Use the mass relevant to your comparison, including passengers and load if you want to represent that situation.
Is horsepower here metric or mechanical?
The hp result is mechanical horsepower. Enter rated kilowatts to avoid mixing hp and metric PS.
Will the displayed time match a road test?
No. It is a constant-power energy comparison that excludes traction, drag, shifting and the engine power curve.
Is 85% drivetrain efficiency a fact about my car?
No. It is an illustrative editable assumption. Use a supported value for your own scenario.
Does more power per tonne always mean faster acceleration?
It helps describe potential, but gearing, traction, power delivery and resistance also determine acceleration.
Next you might need
More in Vehicles
- Battery percent to kWh and km, private, runs on your device
- Dashboard warning lights, private, runs on your device
- EV charging calculator, private, runs on your device
- EV range calculator, private, runs on your device
- Fuel cost calculator, private, runs on your device
- Fuel detour calculator, private, runs on your device





