How strong was that shake?
Lay your phone on a table and watch the shaking as a live trace, with the peak placed on a plain scale. Readings stay on your device.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Phone seismometer
Typed peak
0.05 g
Moderate (intensity V): felt by nearly everyone; sleepers wake and small objects move.
Lay the phone on a firm table, press Start recording and, if asked, allow motion access.
In g, where 1 g is 9.81 m/s². For a computer without sensors.
Lay your phone on a table and watch the shaking as a live trace, with the peak placed on a plain scale. Readings stay on your device.
The shaking trace and its peak now fill a large live screen, with Start and Clear on one bar.
How to use
- Lay the phone flat on a firm table or the floor and press Start recording. Allow motion access if your browser asks.
- Leave it alone for a moment, then tap the table, close a door or stamp nearby. Each shake draws a spike on the trace.
- Read the peak and its level on the scale. Clear peak and trace starts a fresh run.
- On a computer, type a peak acceleration in g to see where it falls on the scale.
Shaking scale by peak acceleration
| Shaking | Intensity | From peak (g) |
|---|---|---|
| Not felt | I | 0 |
| Weak | II–III | 0.002 |
| Light | IV | 0.014 |
| Moderate | V | 0.039 |
| Strong | VI | 0.092 |
| Very strong | VII | 0.18 |
| Severe | VIII | 0.34 |
| Violent | IX | 0.65 |
| Extreme | X+ | 1.24 |
Instrumental intensity (USGS): the lowest peak ground acceleration of each level.
How it works
Inside your phone is an accelerometer: a tiny sensor that feels how quickly the phone speeds up or slows down. A seismograph does the same job for the ground. This tool takes every reading from the accelerometer, draws the size of the shaking over time and keeps the largest value, the peak.
Shaking is measured in g, where 1 g is the pull of gravity, 9.81 m/s². Earthquake scientists place a peak ground acceleration on the Modified Mercalli intensity scale, from I (not felt) to X and above (extreme). A shake of 0.03 g is about intensity IV: felt indoors by many people, with rattling dishes.
A phone is not a calibrated seismograph. Its sensor is noisy at the weakest levels, and a phone that is carried or tapped records its own movement, not the ground's. Use it to compare shakes and to learn what the scale means, never to detect or warn of an earthquake.
Sources
- CISN: Background Information on the ShakeMapsUsed for: reference data
- USGS: CISN ShakeMap, About the MapsUsed for: reference data
Frequently asked questions
Can my phone detect an earthquake?
Only a strong one nearby, and unreliably. It is not a calibrated instrument. Use official earthquake services for real information.
Is my motion data stored or sent?
No. The readings are used on your device to draw the trace and the peak and are never stored, logged or put in the address.
What does g mean?
One g is the acceleration of gravity at the Earth's surface, 9.81 m/s². A shake of 0.1 g is a tenth of that.
Why is the peak so large when I pick the phone up?
Moving the phone is far stronger than any earthquake shaking. Put it on a firm surface and leave it to record the surface instead.
What is the Mercalli scale?
A scale from I to XII that describes how shaking is felt and what damage it causes. This tool uses the USGS table that links it to peak acceleration.
Why does it say not available on this device?
Computers and some browsers have no motion sensor. Use a phone or tablet, or type a peak to look up the scale.





