Skip to content

How much fabric do I need for my quilt?

Quilt size from your blocks, sashing and borders, and the fabric for the top, backing and binding.

cm

cm

cm

Fabric, seams and backing

cm

cm

cm

cm

%,

Covers mistakes and cutting waste; 10 % is common.

Fabric for the quilt top

3.9 m

Plus backing 3.3 m and binding 0.5 m. The finished quilt is 155 cm × 190 cm, 20 blocks.

The quilt top to scale

  • Blocks
  • Sashing
  • Border
Key values as a table
PartFinished size
Block30 cm
Sashing5 cm
Border10 cm
Quilt top155 cm × 190 cm

Fabric to buy, rounded up

Blocks
2.5 m
Sashing
0.8 m
Border
0.8 m
Quilt top in all
3.9 m
Backing
3.3 m, 2 panels joined to 165 cm × 200 cm
Binding
0.5 m, 7 strips

Quilt size from your blocks, sashing and borders, and the fabric for the top, backing and binding.

How to use

  1. Enter how many blocks go across and down, the finished size of one block, and the width of any sashing and border.
  2. Under the result, set the width of your fabric, the seam allowance and the binding strip width.
  3. Read the finished quilt size and the fabric to buy for the top, the backing and the binding.

Quilt size and fabric for 30 cm blocks with 5 cm sashing and 10 cm borders

Blocks (across × down)Quilt top (cm)Top fabric (m)Backing (m)
3 × 4120 × 1552.42.6
4 × 5155 × 1903.93.3
5 × 6190 × 2255.64.7
6 × 8225 × 2958.87.1
8 × 10295 × 36514.211.3

How it works

A quilt top is a grid. Its width is the blocks across times the block size, plus the sashing between them (one fewer than the blocks) and a border on both sides: width = n × block + (n − 1) × sashing + 2 × border, and the same for the length with the rows. All of these are finished sizes; the seam allowance, stated in the settings (a quarter inch, 6.35 mm, in the US; often 7.5 mm in metric patterns), is added on every edge when you cut. Example: 4 × 5 blocks of 30 cm, 5 cm sashing and 10 cm borders make 155 × 190 cm.

Fabric is bought as a length of its width, so the tool counts strips. Blocks are plain squares cut from strips across the fabric, as many as fit per strip; sashing and border strips are joined end to end when they are longer than the fabric is wide. The backing is the top plus a few centimetres on every side, in as many seamed panels as the fabric width needs, laid in whichever direction needs less fabric. The binding is the perimeter plus 10 in (25 cm) for corners and joins, cut into strips of the width you choose. A margin for mistakes is added to the top, and amounts are rounded up to 0.1 m or ⅛ yd.

The result is an estimate. Pieced blocks are cut from several fabrics, so the block fabric here is an upper bound for a single fabric, and a directional print, a diagonal binding or a layout with cornerstones will change the amounts. Prewash allowance and shrinkage are not included: add a little, and check your pattern.

Method

No outside data is used: the result is worked out directly from the formula explained under How it works.

Sources and methods

Frequently asked questions

How big is a quilt top with 12-inch blocks?

Multiply the blocks across by 12 in, add the sashing between them and the border on both sides. Four blocks across with no sashing or border make 48 in; with 2½ in sashing and 4 in borders, 63½ in.

How much backing fabric do I need?

The quilt top plus about 2 in (5 cm) on every side. If that is wider than your fabric, the backing is seamed from panels; the calculator lays them whichever way needs less fabric.

How much binding do I need?

The perimeter of the quilt plus about 10 in (25 cm) for the corners and the joining seams, cut into strips 2¼–2½ in (6–6.5 cm) wide and joined end to end.

What seam allowance should I use?

A quarter inch (6.35 mm) is the quilting standard in the US; metric patterns often use 7.5 mm or 1 cm. Use the one your pattern gives, and keep it the same everywhere.

Why is 42 inches the usual fabric width, not 44 or 45?

Quilting cotton is sold 44–45 in wide, but the selvedges and shrinkage take some away. 42 in (about 110 cm) is a common usable width; enter yours if it differs.

Send feedback