Skip to content

How big will my cross-stitch be?

Finished size from the stitch count and fabric count, the fabric to cut with margins, and the floss for each colour.

Design and fabric

Fabric

Margin

cm,

Room to frame and hold the fabric.

Floss

One number per colour, separated by spaces or lines, without thousands separators.

%,

For tails and travelling.

Finished size

18.1 × 14.5 cm

Cut the fabric 28.1 × 24.5 cm with 5 cm on each side

The design

Fabric to cut
28.1 × 24.5 cm
Cross stitches in the chart
8,000
Stitches per inch
14
Floss in all
6 skeins

Floss per colour

Colour 1 · 3,200 stitches
2 skeins
Colour 2 · 2,100 stitches
1 skein
Colour 3 · 1,400 stitches
1 skein
Colour 4 · 900 stitches
1 skein
Colour 5 · 400 stitches
1 skein

Finished size from the stitch count and fabric count, the fabric to cut with margins, and the floss for each colour.

How to use

  1. Enter the width and height of the design in stitches (from the chart or its description) and choose your fabric: Aida, or evenweave and linen where each stitch covers two threads. Enter the fabric count.
  2. Set the margin you want around the design. The result shows the finished size and the size of fabric to cut.
  3. For floss, type the number of stitches in each colour, one number per colour, and the strands you stitch with. Read the skeins to buy for each colour.

Finished size and fabric to cut on 14 count Aida

Design (stitches)Finished sizeFabric to cut (5 cm margins)
50 × 509.1 × 9.1 cm19.1 × 19.1 cm
100 × 8018.1 × 14.5 cm28.1 × 24.5 cm
150 × 12027.2 × 21.8 cm37.2 × 31.8 cm
200 × 20036.3 × 36.3 cm46.3 × 46.3 cm

How it works

Fabric count is the number of threads (squares on Aida) per inch. Each cross stitch takes one square on Aida, so a design 100 stitches wide on 14 count Aida is 100 ÷ 14 = 7.14 in, or 18.1 cm. Evenweave and linen are normally stitched over two threads, so a stitch is two threads wide and the count is halved: 28 count evenweave stitches like 14 count Aida. A higher count gives finer stitches and a smaller finished piece.

Fabric to cut is the finished size plus the margin on every side, enough to hold it in a frame or hoop and to finish the edges; 5 cm (2 in) is common. Floss is an estimate: one full cross takes about 2(1 + √2) ≈ 4.83 stitch widths of thread (two diagonals on the front, two short runs behind), 25 % is added for tails and travelling between areas, and a skein is six strands of 8 m. Example: 3,200 stitches on 14 count with two strands need 3,200 × 4.83 × 1.25 × (25.4 ÷ 14) mm ≈ 35 m per strand, so 70 m of thread; a skein holds 6 × 8 = 48 m of strand, so 2 skeins.

The floss figure is a planning estimate with stated assumptions, not a manufacturer's formula: backstitch, French knots, fractional stitches and your own tension change the use. Buy a little extra for the colours that matter most, and keep skeins from one dye lot together.

Method

No outside data is used: the result is worked out directly from the formula explained under How it works.

Sources and methods

Frequently asked questions

How do I calculate the finished size of a cross-stitch?

Divide the stitches by the stitches per inch. On Aida that is the fabric count, so 100 stitches on 14 count Aida is 7.14 inches (18.1 cm). On evenweave or linen stitched over two threads, use half the fabric count.

How much fabric do I need?

The finished size plus a margin on every side, at least 5 cm (2 in) for framing and finishing, more if you will hold it in a large hoop or stretch it over a board.

What does fabric count mean?

It is the number of threads or squares per inch. A higher count has smaller squares, finer stitches and a smaller finished design for the same chart. Common Aida counts are 11, 14, 16 and 18.

How many strands of floss should I use?

Two strands is typical on 14 count Aida, three on 11 count, and one or two on 18 count or finer. Six-strand cotton floss is separated into strands before stitching.

How many skeins of floss do I need?

Enter the number of stitches for each colour. The calculator estimates the thread for each colour with a 25 % allowance and rounds up to whole skeins. Charts often list the stitches per colour in the key.

Why is evenweave count halved?

On evenweave and linen, one stitch normally covers two threads in each direction, so a 28 count fabric has 14 stitches per inch, the same size as 14 count Aida.

Send feedback