Skip to content

How much wax do I need for my candles?

Wax and fragrance oil by weight for a jar, tin or batch of candles, from the container size and the fragrance load.

%

Batch and extra

%,

About 90% leaves room below the rim.

%,

Wax clings to the pot and the stirrer; 5% is a usual allowance.

Wax to melt

201 g

plus 12 g fragrance oil at 6% · 213 g in all

Amounts

Wax
201 g
Fragrance oil
12 g
Wax and oil together
213 g

Densities are typical values: use your wax's data sheet. The fragrance oil's supplier states its maximum load and safe use; never heat wax over an open flame or leave it unattended.

Wax and fragrance oil by weight for a jar, tin or batch of candles, from the container size and the fragrance load.

How to use

  1. Give the container as its capacity to the brim and how full you fill it, or as a round jar with its diameter and the height of the wax.
  2. Choose the wax and the fragrance load, the percentage of fragrance oil by weight of the wax.
  3. Read the wax and fragrance oil to weigh out; for a batch, set the number of candles and the extra for the pouring pot.

Soy wax and fragrance oil per jar: 90% filled, 6% fragrance, 5% extra

Jar (ml)Wax (g)Fragrance oil (g)
100804.8
2001609.6
25020112
30024114.4
40032119.3

How it works

Candle wax is bought and weighed by mass, but a container is measured by volume. The bridge is the density of the wax: the volume of wax in the container times its density gives the weight. A container filled to 90% of 250 mL holds 225 mL, and at about 0.9 g/mL that is 202.5 g. A round jar is a cylinder, π × r² × height, where r is half the diameter.

Fragrance oil is added as a percentage of the weight of the wax, so a 6% load means 6 g of oil for every 100 g of wax. The blend weighs wax × (1 + load), which means the wax is the blend divided by 1.06, and the oil the rest. Example: with 5% extra for the pouring pot, 212.6 g of blend is 200.6 g of wax and 12.0 g of oil.

The densities here are typical figures (soy and paraffin about 0.9 g/mL, beeswax about 0.96) and real waxes and blends vary, so use your wax's data sheet for a custom value. How much oil a wax can hold depends on the wax and the oil, and the supplier states a maximum; the tool does not choose a wick, which depends on the wax, the jar and the oil.

Method

The result is an estimate based on common rules of thumb (m = ρ × V), explained under How it works.

Sources and methods

Frequently asked questions

How much wax do I need for a candle jar?

Multiply the volume of wax in the jar by the wax density (about 0.9 g/mL). A jar that holds 250 mL filled to 90% takes about 200 g of soy wax.

How much fragrance oil should I add?

Many makers use 6–10% of the wax weight. The oil supplier states a maximum for each oil and wax; going over it can make the oil sweat out of the candle.

Is the fragrance load a percentage of the wax or of the total?

Of the wax weight. For 100 g of wax at 6% you add 6 g of oil, so the blend weighs 106 g. The calculator works this out for you.

Why do I need extra wax?

Some wax always stays on the pouring pot and stirrer, and a little more is needed to top up a candle that sinks as it cools. About 5% is a usual allowance.

Can I use ounces instead of grams?

Yes. Choose inches as the length unit and the weights show in ounces and pounds; a capacity can be typed in US fluid ounces (one is about 29.6 mL).

Send feedback