How much water does the pool hold?
Litres or gallons of water in a rectangular or round pool, from its length, width and depth.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Volume
60 m³
Holds 60,000 L · surface 122 m²
Formula and capacity
- Formula
- V = l × w × h, surface 2 × (lw + lh + wh)
- US gallons
- 15,850.3 US gal
- Imperial gallons
- 13,198.2 imp gal
Litres or gallons of water in a rectangular or round pool, from its length, width and depth.
How to use
- Measure the length and width of the pool, and its depth at the shallow and the deep end.
- Enter the length, the width and the average depth. The solid is already set to a box.
- Read the volume in cubic metres and in litres or gallons: the amount of water that fills the pool.
Pool volume by size
| Length × width × average depth (m) | Volume (m³) | Litres |
|---|---|---|
| 5 × 3 × 1.2 | 18 | 18,000 |
| 6 × 3 × 1.4 | 25.2 | 25,200 |
| 8 × 4 × 1.5 | 48 | 48,000 |
| 10 × 4 × 1.5 | 60 | 60,000 |
| 12 × 6 × 1.6 | 115.2 | 115,200 |
Rectangular pools. Tap a row to open it in the calculator.
How it works
A rectangular pool holds as much water as a box of the same size: length × width × depth. The volume in cubic metres is also the water you need to know before you fill it or add chemicals: one cubic metre holds 1,000 litres, so a pool of 60 m³ takes 60,000 litres.
Most pools are not the same depth everywhere. If the floor slopes evenly from the shallow end to the deep end, use the average of the two depths. A pool 1 m deep at one end and 2 m at the other has an average depth of 1.5 m, and the volume of a box of that depth is the same as the volume of the pool with its slope.
If the floor is stepped or has a deep section, split the pool into rectangles and add their volumes. Fill the pool to the working water level, which is usually a little below the rim, not to the top. Round pools, ovals and kidney shapes are different; a round pool is a cylinder, and an oval pool can be approximated with an average width.
Worked example
How many litres does a 10 × 4 m pool hold when it is 1 m deep at one end and 2 m at the other?
- Average depth: (1 + 2) ÷ 2 = 1.5 m.
- Volume: 10 × 4 × 1.5 = 60 m³.
- One cubic metre is 1,000 litres, so the pool holds 60,000 litres.
60 m³, or 60,000 litres of water.
Sources
- NIST SP 811: Guide for the Use of the International System of Units (SI)Used for: constants
Frequently asked questions
How many litres are in a pool of 8 × 4 m?
It depends on the depth. At an average depth of 1.5 m the volume is 48 m³, which is 48,000 litres.
How do I measure the volume of a pool with a sloping floor?
Add the shallow and deep depths and halve the sum to get the average depth, then multiply length × width × average depth.
How do I find the volume of a round pool?
A round pool is a cylinder: π × radius² × depth. Choose the cylinder in the volume calculator.
Should I measure to the rim or to the water line?
To the water line. The pool is not filled to the rim, so the depth to the water level gives the amount of water.
Next you might need
More in Math & numbers
- Percentage calculator, private, runs on your device
- A/B test significance calculator, private, runs on your device
- Average calculator, private, runs on your device
- Chi-square test calculator, private, runs on your device
- Circle calculator, private, runs on your device
- Combinations and permutations calculator, private, runs on your device





