Skip to content

How much gravel do I need?

Cubic metres or yards, tonnes or tons and bags of gravel, crushed stone, sand, topsoil or mulch for a bed or path.

More options
%

Weight to order

1.39 t

0.83 m³ of material, including 10% extra.

Volume to order
0.83 m³
Volume in place
0.75 m³
Weight, loose
1,386 kg
Bags
56 bags of 25 kg

Cubic metres or yards, tonnes or tons and bags of gravel, crushed stone, sand, topsoil or mulch for a bed or path.

How to use

  1. Choose the material and enter the length and width of the area and how deep the layer should be.
  2. Read the volume to order and its weight. Under More options you can change the extra for settling and the weight of the bags you buy.
  3. Compare the weight with what the supplier sells: loose by the tonne or ton, in bulk bags or in small bags.

Typical loose density and the weight for the example bed (5 × 3 m, 5 cm, 10 % extra)

MaterialDensity (kg/m³)Weight (tonnes)
Gravel (pea gravel)1,6801.39
Crushed stone1,6001.32
Sand1,6001.32
Topsoil1,2501.03
Mulch4000.33

How it works

The volume of a flat bed is its length × width × depth. Because loose material settles and some is spilled, the calculator adds an extra (10 % by default). The weight then follows from the bulk density of the material, the weight of one cubic metre as it lies loose: mass = volume × density.

Example: a bed 5 m × 3 m and 5 cm deep holds 5 × 3 × 0.05 = 0.75 m³. With 10 % extra that is 0.825 m³. Pea gravel weighs about 1 680 kg per m³ (105 lb per ft³), so the order is 0.825 × 1 680 = 1 386 kg, or 1.39 tonnes, which is 56 bags of 25 kg. The table shows the densities used.

Densities are typical values: they change with the rock, the grain size and the moisture, and wet sand or soil can be a fifth heavier. Ask your supplier for the figure for the product you buy. A US ton here means the short ton of 2 000 lb, and a tonne is 1 000 kg.

Frequently asked questions

How much does a cubic metre of gravel weigh?

About 1.6 to 1.7 tonnes for gravel and crushed stone, which is roughly 100 to 105 lb per cubic foot. Sand is similar, topsoil lighter and mulch much lighter.

How deep should a gravel path or driveway be?

A garden path is often 5 cm (2 in) of gravel on a firm base; a driveway needs a deeper base of crushed stone, 10 to 20 cm (4 to 8 in), under a top layer. Follow your supplier's advice for the load.

How many cubic yards are in a ton of gravel?

Roughly 0.7 cubic yards per US ton, because a cubic yard of gravel weighs about 1.4 to 1.5 tons. The calculator does the conversion from your dimensions directly.

Why add extra when ordering gravel or soil?

Loose material compacts when it is raked and walked on, and some is lost when moving it. About 10 % extra avoids a second delivery.

How many bags of gravel do I need?

Divide the weight you need by the weight of one bag and round up. A 25 kg bag covers only about 0.015 m³, so for more than a few bags, loose or bulk-bag delivery is usually cheaper.

Send feedback