Skip to content

How do you find hidden sounds in a recording?

Open a sound or video file or record one, see it as a spectrogram, bring out faint details and listen to them isolated.

Spectrogram workspace

Colour

Levels
Clean-up

Subtracts each frequency’s typical level, so hum and hiss fade and changing sounds stand out.

Frequency

Hz

Hz

Open a sound or video file or record one, see it as a spectrogram, bring out faint details and listen to them isolated.

Start with your own sound, the sample sound or a picture made into sound, and close a sound when you are done.

How to use

  1. Open an audio or video file (drop it, pick it or paste it), or press Record and allow the microphone.
  2. Look for the sound in the spectrogram: zoom in on time or frequency, and change the colours, levels, gamma or Remove steady noise until faint details stand out.
  3. Select the sound: drag a rectangle, draw around it with Freehand, or use Trace a curve to follow a tone that glides up or down; a traced line is measured, and a passing source's speed is estimated from its Doppler shift.
  4. Press Play next to the selection to hear only that part, amplified, and the main Play to hear the original over the same moments; pressing one while the other plays switches at the same point, so you can compare. Slow it down if it is fast, and download it as WAV.

How it works

A spectrogram is a picture of sound: time runs from left to right, pitch (frequency) from bottom to top, and the brighter a spot, the louder that frequency was at that moment. A sound covered by a louder one often sits elsewhere on the picture, so the eye finds it before the ear: a distant aircraft as a slow curve, a bird above traffic, a hum as a steady line.

The picture comes from the short-time Fourier transform. The sound is cut into short overlapping windows of N samples, and each is split into its frequencies: X(k) = Σ x(n)·w(n)·e^(−2πikn/N), where x is the sound, w the window that fades each piece in and out, and k a frequency step of f_s/N hertz (f_s is the sample rate). A longer window separates close tones better but blurs quick changes: at 48 000 samples a second, 2048 samples are 43 ms long and 23 Hz apart, 512 samples 11 ms and 94 Hz.

Isolating keeps the frequencies inside your selection, sets the rest to zero and turns the pieces back into sound; slowing down keeps the pitch by moving each frequency's phase. A recording holds nothing above half the rate it was sampled at (the Nyquist limit: 24 kHz for most files), isolation leaves some faint ringing, and a sound that shares its time and frequency with louder noise cannot be pulled apart. Sources: J. O. Smith, Spectral Audio Signal Processing and Digital Audio Resampling (CCRMA, Stanford); W3C Web Audio API.

A picture can go the other way: each row of it becomes a steady tone and each column a moment, as loud as the pixel is bright, so the spectrogram draws the picture. The rows follow the frequency scale you place it on (linear, log or mel), so it looks right on that scale and bends on another. Lossy formats such as MP3 or AAC throw away the faint details it is made of; save it as WAV.

Frequently asked questions

Is my recording uploaded?

No. Files and microphone recordings are decoded and analysed in your browser, and nothing is sent or stored. A copied link holds only the display settings.

Can I open a video?

Yes. MP4 or MOV with AAC sound and WebM videos work in most browsers; only the sound track is used and the picture is ignored. If a format (such as some MKV files, AC-3 or HEVC video) cannot be decoded, convert it to MP4 with AAC sound, MP3 or WAV.

Can I see and hear bat calls?

Yes, from a recording made for them: most bats call above 20 kHz, and an ordinary recording stops at half its sample rate, usually 22 or 24 kHz, so you need a bat detector or recorder at 192 or 384 kHz (WAV or FLAC). This page shows everything up to half that rate and brings it into hearing: played ten times slower, a 40 kHz call is heard at 4 kHz and lasts ten times longer (time expansion), and played ten times faster an elephant's 15 Hz rumble becomes a 150 Hz hum. A shift instead moves every pitch by the same amount in real time, as a heterodyne bat detector does. A phone or ordinary microphone filters ultrasound out.

How do I measure the speed of a passing car, train or plane?

Record it passing, choose Trace a curve and follow one clear tone (an engine or tyre hum, a horn, or one of its harmonics) from well before to well after the moment its pitch falls fastest. The Doppler effect f = f₀·c/(c − v·cosθ) (f₀ its own pitch, c the speed of sound, v its speed, θ the angle between its path and the line to you) is fitted to the trace and gives the speed, its own pitch and when it was closest: a 400 Hz horn passing at 60 km/h in air (c = 343 m/s) is heard at about 420 Hz coming and 382 Hz going. Set the air temperature, or water for a boat heard under water. A short or wandering trace gives no speed or only a rough one.

The quiet sound is still buried. What helps?

Turn on Remove steady noise to fade hum and hiss, lower Gamma to lift faint levels, zoom in on the frequencies where the sound is, and try Narrow tones for a steady whistle or Sharp transients for clicks. A treble lift helps with high, weak sounds.

Why does the isolated sound ring or warble?

Cutting frequencies out leaves small traces at the edges of the selection, sometimes called musical noise. A slightly larger selection, a smaller window or the Original switch for comparison helps. It is a tool for finding and checking sounds, not for studio restoration.

Can I hide a picture in a sound?

Yes. Open the sound, choose a picture under Picture, drag and resize it to the time and pitch you want, set how loud it is against the sound (and lower the sound under it if it should read clearly), then Mix in and download the track as WAV. With no sound open, the picture becomes a sound of its own.

More in Media, files & devices

All 35 utilities in Media, files & devices

Send feedback