Skip to content

How will a different tire size change the diameter?

Compare nominal diameters, circumference and the speedometer ratio.

mm

%

in

mm

%

in

km/h

Tire diameter change

+0.4%

The speedometer reads low: at 100 km/h indicated you drive 100.4 km/h.

Original diameter
631.9 mm
New diameter
634.3 mm
Radius / clearance change
1.2 mm
Estimated actual speed
100.4 km/h
Formula

D = rim diameter + 2 × width × aspect / 100

Compare nominal diameters, circumference and the speedometer ratio.

How to use

  1. Split each metric tire size into width, aspect ratio and rim diameter.
  2. Enter the original size and the candidate size.
  3. Read the diameter change; the indicated speed is the one used in the ratio.

How it works

A metric size gives width in millimetres, sidewall height as a percentage of width and rim diameter in inches. Add two sidewalls to the rim diameter for the nominal outer diameter D. Circumference is πD and the speed ratio is Dnew/Dold.

Nominal geometry excludes tread wear, load deflection and manufacturer dimensions. This is not a fitment or approval check; wheel width, offset, clearance, load index and speed rating still matter.

Worked example

What does the default scenario give?

  1. Use original width 205 mm, original aspect ratio 55%, original rim diameter 16 in, new width 225 mm, new aspect ratio 45%, new rim diameter 17 in, indicated speed 100 km/h.
  2. Apply D = rim diameter + 2 × width × aspect / 100.

The primary result is +0.4%.

Frequently asked questions

What does 205/55 R16 mean?

The nominal width is 205 mm, sidewall height is 55% of that width and the rim diameter is 16 inches. R denotes radial construction.

What happens to the speedometer with larger tires?

For the same wheel rotation rate, a larger nominal circumference covers more ground. The ratio here assumes the original indicated speed was accurate.

Is there a universal allowed percentage change?

No approval threshold is applied. Check your vehicle documentation and applicable requirements.

Does the clearance result prove the tire fits?

No. It is only half the diameter difference, before suspension movement or other fitment details.

Why can measured circumference differ?

Tread, pressure, load and tire design affect the loaded rolling circumference.

Send feedback