How fast does the output gear turn?
The gear ratio, output speed, torque and direction of two or three meshing gears, drawn to scale with arrows showing which way each turns.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Output speed
400 rpm
The output turns 3× slower, at 400 rpm, the opposite way, with 3× the torque: 30 N·m.
Key values as a table
| Gear | Teeth | Speed |
|---|---|---|
| Driving | 20 | 1,200 rpm |
| Driven | 60 | 400 rpm |
- Gear ratio
- 3 : 1
- Output torque
- 30 N·m
- Turns
- the opposite way
The gear ratio, output speed, torque and direction of two or three meshing gears, drawn to scale with arrows showing which way each turns.
How to use
- Enter the teeth on the driving gear and on the driven gear, or drag the edge of either gear.
- Enter how fast the driving gear turns, and choose whether an idler gear sits between them.
- Read the output speed, the gear ratio, the torque and which way the output turns.
How it works
Meshing teeth move past each other at the same speed, so a gear with more teeth turns more slowly: the speeds go in the opposite ratio to the teeth. The gear ratio is the driven gear's teeth divided by the driving gear's, and the output speed is the input speed divided by that ratio.
What you lose in speed you gain in turning force: without losses the power stays the same, so the torque grows by the ratio. A 20-tooth gear at 1,200 rpm driving a 60-tooth gear gives a ratio of 60 ÷ 20 = 3 : 1, so the output turns at 1,200 ÷ 3 = 400 rpm with three times the torque. Every mesh reverses the direction, so two gears turn opposite ways; an idler between them makes the ends turn the same way without changing the ratio.
Real gears lose a few percent to friction, so the torque is a little lower. The idea follows the mechanical advantage of simple machines in OpenStax College Physics 2e, section 9.5 (openstax.org).
Worked example
A 20-tooth gear drives a 60-tooth gear at 1,200 rpm and 10 N·m. What comes out?
- Ratio = 60 ÷ 20 = 3.
- Speed: 1,200 rpm ÷ 3 = 400 rpm.
- Torque: 10 N·m × 3 = 30 N·m (ideal, no friction).
400 rpm at 30 N·m: slower, with 3 times the torque.
Sources
- OpenStax College Physics 2e, §9.5 Simple MachinesUsed for: formula
Frequently asked questions
Can the driven gear turn faster than the driver?
Yes. Choose fewer teeth on the driven gear than on the driver. The speed increases while the ideal output torque decreases.
Does the number of idler teeth affect how fast the idler spins?
Yes. A smaller idler spins faster and a larger one spins slower. The output speed still depends only on the driver and driven gears.
How do bike gears work?
The chain works like meshing teeth: front chainring teeth ÷ rear sprocket teeth is how many times the wheel turns per pedal turn. With a chain both turn the same way.
Can two gears with different tooth sizes mesh?
No. Meshing gears need the same tooth size (module or pitch); that is why the radius of each gear here follows its number of teeth.
Can this calculate a compound gearbox with several stages?
Not directly: the three-gear option has a single idler. For a compound gearbox, calculate each stage separately and multiply the stage ratios.





