Skip to content

How much pressure is there under water?

The pressure at any depth in the sea, a lake or a pool, the water's own share and the air above, drawn against depth live.

Total pressure

2.02 bar

At 10 m the water alone presses with 1.01 bar; with the air above, that is 2 times the pressure at the surface.

Key values as a table
DepthTotalWater alone
0 m1.01 bar0 bar
4 m1.42 bar0.402 bar
8 m1.82 bar0.804 bar
12 m2.22 bar1.21 bar
16 m2.62 bar1.61 bar
Water alone (gauge)
1.01 bar
Compared with the surface
2×
One more atmosphere every
10.1 m

The pressure at any depth in the sea, a lake or a pool, the water's own share and the air above, drawn against depth live.

How to use

  1. Enter the depth, or drag the diver up and down the chart.
  2. Choose seawater or fresh water.
  3. Read the total pressure, the water's own share and how it compares with the surface.

How it works

Under water you carry the weight of all the water above you, and on top of that the weight of the air above the water. The deeper you go, the taller that column of water, so the pressure grows in a straight line with depth: p = p₀ + ρ·g·h, where p₀ is the air pressure at the surface (101,325 Pa), ρ the density of the water, g the gravitational acceleration and h the depth.

Seawater weighs 1,025 kg per cubic metre, so every metre adds 1,025 × 9.81 ≈ 10,050 Pa, about a tenth of an atmosphere. At 10 m a diver feels 101,325 + 100,518 ≈ 202,000 Pa, about 2 bar: twice the pressure at the surface. The shape of the water does not matter, only the depth, which is why a narrow tube of water and a lake press the same at the same depth.

The density of water is taken as constant (it grows only slightly with depth, temperature and salt), and the air pressure is the standard sea-level value. Formula from OpenStax University Physics, volume 1, section 14.1, densities from OpenStax College Physics 2e, table 11.1 (openstax.org).

Worked example

What is the pressure at 10 m deep in the sea?

  1. Water alone: p = ρgh = 1025 kg/m³ × 9.807 m/s² × 10 m = 1.01 bar.
  2. Add the air above the surface, 1.01 bar: 2.02 bar in all.

1.01 bar from the water, 2.02 bar absolute (1.99 atmospheres).

Frequently asked questions

Is depth measured from the surface or along a sloping bottom?

Use the vertical distance below the water surface. The distance along a slope or a slanted pipe is not the water depth.

What is the difference between gauge and absolute pressure?

Gauge pressure counts only the water; absolute pressure adds the air above it. Dive gauges usually show gauge pressure, gas laws need absolute.

Can I use this to find pressure while water flows through a pipe?

It gives only the pressure from a vertical water column at rest. Flow, pipe friction and pumps need a separate calculation.

What is the pressure at the bottom of the ocean?

In the Mariana Trench, about 11,000 m down, it is over 1,100 bar: more than a tonne on every square centimetre.

Can I use this for a lake high above sea level?

The water’s added pressure is still estimated from depth, but the total assumes standard sea-level air pressure. The absolute pressure at a high-altitude lake will usually be lower.

Send feedback