What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Effort needed
245 N
Apply 245 N to hold 981 N: the lever multiplies your force 4×, like holding only 25 kg.
Key values as a table
| Part | Force | From the fulcrum |
|---|---|---|
| Load | 981 N | 0.4 m |
| Effort | 245 N | 1.6 m |
- Mechanical advantage
- 4×
- Feels like holding
- 25 kg
- Moment of the load
- 392 N·m
- Force on the fulcrum
- 1,226 N
The force to lift a load with a lever of any class, its mechanical advantage and the moments, drawn to scale with a fulcrum you can drag.
How to use
- Choose the kind of lever: fulcrum in the middle, load in the middle or effort in the middle.
- Enter the load, the length of the lever and where the fulcrum, load or effort sits, or drag it along the beam.
- Read the force you need, the mechanical advantage and the force on the fulcrum.
How it works
A lever turns around its fulcrum. It balances when the turning effects on both sides are equal: force times distance from the fulcrum, the moment. So F_effort × d_effort = F_load × d_load: push twice as far from the fulcrum and you need half the force. The ratio d_effort ÷ d_load is the mechanical advantage.
With a 2 m crowbar and the fulcrum 0.4 m from a 100 kg rock, the rock presses with 100 × 9.81 = 981 N on a 0.4 m arm, while you push on a 1.6 m arm: 981 × 0.4 ÷ 1.6 ≈ 245 N, a quarter of the weight. The price is distance: your end moves four times as far as the rock.
In a first-class lever the fulcrum is between the load and the effort (crowbar, seesaw, scissors); in a second-class lever the load is in the middle (wheelbarrow, nutcracker), which always saves force; in a third-class lever the effort is in the middle (tweezers, your forearm), which costs force but gains speed. The beam is taken as weightless and rigid. Based on OpenStax College Physics 2e, section 9.5 (openstax.org).
Worked example
How much force lifts a 100 kg load on the default first-class lever?
- The load weighs 100 × 9.80665 = 980.7 N, at 0.4 m from the fulcrum; the effort acts at 1.6 m.
- Mechanical advantage = 1.6 ÷ 0.4 = 4.
- Effort = 980.7 N ÷ 4 = 245.2 N.
245.2 N, like holding 25 kg.
Sources
- OpenStax College Physics 2e, §9.5 Simple MachinesUsed for: formula
Frequently asked questions
How do I balance a seesaw?
Make weight times distance from the pivot equal on both sides: a 40 kg child 1.5 m out balances a 60 kg adult sitting 1 m out.
Why is a third-class lever useful if it needs more force?
The load end moves farther and faster than your hand. Your biceps pull close to the elbow so your hand can swing quickly, and tweezers turn a firm squeeze into a fine, gentle grip.
Does a lever save energy?
No. The force goes down by the same factor as the distance goes up, so the work, force times distance, stays the same.
What is the force on the fulcrum?
In a first-class lever the fulcrum carries the load and your push together; in the other classes it carries their difference.
Where do I measure the fulcrum position from?
For a first-class lever, measure from the load end. For second- and third-class levers, the load or effort position is measured from the fulcrum at the end of the beam.
Next you might need
More in Physics
- Artificial gravity calculator, private, runs on your device
- Black hole time dilation, private, runs on your device
- Blackbody radiation calculator, private, runs on your device
- Circular motion calculator, private, runs on your device
- Colour mixing: light and paint, private, runs on your device
- Cooling calculator, private, runs on your device





