Skip to content

How fast does a reaction go?

Concentration over time for zero, first and second order reactions, half-lives, and the Arrhenius equation for temperature.

1/h

mol/L

[A] after 10 h

0.313 mol/L

31.3% of A is left after 10 h. It took 5.98 h to fall to half.

Key values as a table
Time[A] (mol/L)
0 h1 mol/L
2.99 h0.707 mol/L
5.98 h0.5 mol/L
10 h0.313 mol/L
12 h0.25 mol/L
17.9 h0.125 mol/L
Half-life
5.98 h
Rate at the start
0.116 mol/(L·h)
Rate now
0.0364 mol/(L·h)
Formula

[A] = [A]₀ e^(−kt) = 1 × e^(−0.116 × 10) = 0.313

Concentration over time for zero, first and second order reactions, half-lives, and the Arrhenius equation for temperature.

How to use

  1. Choose the rate law of your reaction (zero, first or second order), or Arrhenius to see how temperature changes the rate.
  2. Enter the rate constant k, the starting concentration [A]₀ and the time, in the time unit that k uses.
  3. Read the concentration left and the half-life, and drag the point along the curve to follow the reaction through time. In Arrhenius, drag T₂ along the line.

How it works

A reaction's rate law says how its speed depends on how much reactant is left: rate = k[A]ⁿ, where [A] is the concentration in mol/L, k the rate constant and n the order. At zero order the rate never changes, so [A] falls in a straight line, [A] = [A]₀ − kt. At first order it is proportional to [A], so [A] = [A]₀e^(−kt) falls by half every t½ = ln 2 / k, whatever is left. At second order, 1/[A] = 1/[A]₀ + kt, and each half-life is twice as long as the one before.

Hydrogen peroxide decomposes at first order with k = 0.116 per hour: from 1.000 mol/L, after 10 hours [A] = 1.000 × e^(−1.16) = 0.313 mol/L, and its half-life is 0.693 / 0.116 = 5.98 hours. Butadiene dimerizes at second order with k = 0.0576 L/(mol·min): from 0.200 mol/L it falls to 0.179 mol/L in 10 minutes.

Warmer reactions are faster because more molecules collide with at least the activation energy Ea. The Arrhenius equation k = A·e^(−Ea/RT), with R = 8.314 J/(mol·K) and T in kelvin, gives ln(k₂/k₁) = (Ea/R)(1/T₁ − 1/T₂): a straight line of ln k against 1/T. With Ea = 50 kJ/mol, cooling from 20 °C to 4 °C slows a reaction about threefold, which is why a fridge keeps food longer. Real reactions may follow other orders or several steps. Source: OpenStax Chemistry 2e, sections 12.4 and 12.5.

Worked example

How much hydrogen peroxide is left after 10 hours at first order with k = 0.116 per hour, from 1.000 mol/L?

  1. [A] = [A]₀·e^(−kt) = 1.000 × e^(−1.16).
  2. That is 0.313 mol/L. The half-life is ln 2 / k = 5.98 hours.

0.313 mol/L left; half-life 5.98 hours.

Frequently asked questions

How do I know the order of a reaction?

From measurements: plot [A], ln[A] and 1/[A] against time. Whichever gives a straight line tells the order: zero, first or second. The order cannot be read from the balanced equation.

Why does the half-life change for zero and second order reactions?

Only at first order is the rate proportional to what is left, so each half takes equally long. At zero order the next half is smaller but the pace is the same, so half-lives get shorter; at second order the rate falls with the square of [A], so they get longer.

Does a 10 °C rise double the reaction rate?

It is a rule of thumb that holds near room temperature for activation energies around 50 kJ/mol. A reaction with a higher activation energy is more sensitive to temperature; the Arrhenius mode shows the actual factor per 10 °C.

Why does a fridge keep food fresh longer?

Spoilage is a set of chemical and biological reactions whose rates follow the Arrhenius equation. At 4 °C instead of 20 °C, a reaction with an activation energy of 50 kJ/mol runs about three times slower, so the same spoilage takes about three times as long.

What units does the rate constant have?

It depends on the order: mol/(L·s) for zero order, 1/s for first order and L/(mol·s) for second order, with any time unit in place of seconds. Here k uses the time unit you choose.

Send feedback