How far does a reaction go?
Equilibrium concentrations from K and the starting amounts, with the ICE table and which way Le Chatelier pushes it.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Such as N2 + 3H2 <=> 2NH3; balanced for you.
Example reactions
[HI] at equilibrium
1.87 mol/L
Q₀ = 0 is below K = 50.5, so the reaction runs forward until Q = K. At equilibrium: [H₂] = 0.065 mol/L, [I₂] = 1.07 mol/L and [HI] = 1.87 mol/L.
H₂ + I₂ ⇌ 2 HI: start and equilibrium
- Initial
- Equilibrium
Key values as a table
| Species | Initial | Equilibrium |
|---|---|---|
| [H₂] | 1 mol/L | 0.065 mol/L |
| [I₂] | 2 mol/L | 1.07 mol/L |
| [HI] | 0 mol/L | 1.87 mol/L |
ICE table
| mol/L | [H₂] | [I₂] | [HI] |
|---|---|---|---|
| Initial | 1 | 2 | 0 |
| Change | −0.935 | −0.935 | +1.87 |
| Equilibrium | 0.065 | 1.07 | 1.87 |
Le Chatelier's principle
- Adding H₂ or I₂ (or removing a product) pushes the equilibrium to the right, toward the products.
- Adding HI pushes it back to the left, toward the reactants.
- Concentration and pressure only move the mixture; only a change of temperature changes K itself.
Equilibrium concentrations from K and the starting amounts, with the ICE table and which way Le Chatelier pushes it.
How to use
- Type the reaction with an arrow, such as N2 + 3H2 <=> 2NH3, or pick an example. It is balanced for you; mark pure solids and liquids (s) or (l).
- Enter the equilibrium constant K and the starting concentration of each species in mol/L.
- Read the equilibrium concentrations, the ICE table and which way the reaction ran. Drag the end of a starting bar to see how the equilibrium follows.
How it works
A reversible reaction aA + bB ⇌ cC + dD runs both ways at once. It settles when the reaction quotient Q = [C]ᶜ[D]ᵈ / ([A]ᵃ[B]ᵇ), with each concentration in mol/L raised to its coefficient, equals the equilibrium constant K. If Q is below K at the start, the reaction runs forward until it reaches K; if Q is above K, it runs in reverse. Pure solids and liquids count as 1 and are left out.
An ICE table tracks the Initial concentrations, the Change and the Equilibrium values. Each species changes by its coefficient times one unknown x. For PCl₅ ⇌ PCl₃ + Cl₂ with K = 0.0211, starting from 1.00 mol/L PCl₅: x² / (1.00 − x) = 0.0211, so x² + 0.0211x − 0.0211 = 0 and x = 0.135. At equilibrium [PCl₃] = [Cl₂] = 0.135 mol/L and [PCl₅] = 0.865 mol/L. The tool solves the same equation for any coefficients to about ten digits, also where the textbook shortcut of a small x fails.
Le Chatelier's principle says an equilibrium shifts to undo a disturbance: adding a reactant drives it toward the products, squeezing a gas mixture favours the side with fewer gas molecules. Temperature is different: it changes K itself, so this tool takes K as given for one temperature. It treats concentrations as ideal (activities equal to concentrations). Source: OpenStax Chemistry 2e, sections 13.2 to 13.4.
Worked example
What are the concentrations at equilibrium for H₂ + I₂ ⇌ 2 HI with K = 50.5, from 1.00 mol/L H₂ and 2.00 mol/L I₂?
- ICE table: H₂ and I₂ each fall by x, HI rises by 2x.
- K = (2x)² / ((1 − x)(2 − x)) = 50.5, solved for x = 0.935 mol/L.
- Equilibrium: [H₂] = 0.065, [I₂] = 1.065 and [HI] = 1.870 mol/L.
[H₂] 0.065, [I₂] 1.065 and [HI] 1.870 mol/L.
Sources
- OpenStax Chemistry 2e, §13.4 Equilibrium CalculationsUsed for: formula
Frequently asked questions
What is an ICE table?
A three-row table of Initial concentrations, the Change as the reaction runs (each species by its coefficient times x, negative for reactants when it runs forward) and the Equilibrium concentrations, Initial plus Change. Putting the equilibrium row into K = Q gives one equation in x.
What is the difference between Q and K?
Both have the same formula. K is the value at equilibrium, fixed for a reaction at a given temperature; Q is the value for any mixture. Comparing them tells which way the reaction will go: forward while Q < K, in reverse while Q > K.
Why are solids and liquids left out of K?
A pure solid or liquid has a fixed concentration whatever its amount, so its activity is 1 and it drops out of the expression. For CaCO₃(s) ⇌ CaO(s) + CO₂(g), K is just [CO₂].
When can I use the small-x approximation?
When K is small compared with the starting concentrations, x is small and C − x is about C, so the quadratic becomes a square root. The usual check is that x is under 5 % of C. This tool solves the full equation, so it never needs the shortcut.
How does temperature shift an equilibrium?
It changes K. For an exothermic reaction (ΔH < 0) heating lowers K and shifts the mixture toward the reactants; for an endothermic one it raises K. Enter the K for your temperature.
Next you might need
More in Chemistry
- Empirical formula calculator, private, runs on your device
- Gas law calculator, private, runs on your device
- Molar mass calculator, private, runs on your device
- Molarity calculator, private, runs on your device
- Moles calculator, private, runs on your device
- Partial pressure calculator, private, runs on your device





