How much solute do you need for your solution?
Molarity, the mass to weigh or the volume from any two of amount, volume and concentration.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
More options
Solute needed
5.844 g
Dissolve 5.844 g (0.1 mol) and make up to 100 mL of solution for 1 mol/L.
- Moles
- 0.1 mol
- Molality
- 1.062 mol/kg
- Mass percent
- 5.84%
Molarity, the mass to weigh or the volume from any two of amount, volume and concentration.
How to use
- Choose what to find: the amount of solute to weigh, the solution volume or the molarity.
- Enter the other two and the solute's molar mass, for example 58.44 g/mol for sodium chloride. Pick grams or moles, millilitres or litres beside the numbers.
- Read the answer and the recipe, and drag the liquid level or the gauge to see how the three move together.
How it works
Molarity says how much of a substance is dissolved in each litre of solution: moles of solute per litre, written mol/L or M. The same amount of solute in more liquid gives a weaker solution, and more solute in the same liquid a stronger one.
The formula is c = n ÷ V, where c is the molarity, n the amount of solute in moles and V the volume of the solution in litres. Moles come from a mass through the molar mass M: n = m ÷ M. To make 100 mL of 1.00 M sodium chloride you need n = 1.00 × 0.100 = 0.100 mol, which is 0.100 × 58.44 = 5.84 g, dissolved and made up to 100 mL.
V is the volume of the finished solution, not of the water added, so dissolve the solute and then fill to the mark of a volumetric flask. Molality, moles per kilogram of solvent, does not change with temperature; it needs the solution's density, 1 g/mL by default, which is close only for dilute water solutions. Source: OpenStax Chemistry 2e, sections 3.3 and 11.4.
Sources
- OpenStax Chemistry 2e, §11.4 Colligative Properties (molality)Used for: formula
- OpenStax Chemistry 2e, §3.3 MolarityUsed for: formula
Frequently asked questions
Do I need a molar mass if I already know the moles?
Not to relate moles, volume and molarity. You still need the correct molar mass for the grams, mass percentage and molality shown alongside the answer.
Can I enter millimolar concentrations?
Yes. Select the millimolar unit beside the concentration. One millimolar is one thousandth of a mole per litre.
Why is the molality missing?
The density and volume entered may imply a total solution mass no greater than the solute mass. That leaves no positive solvent mass; check the density, units and amount.
Where do I find the molar mass?
Add up the atomic weights of the formula, or use the molar mass calculator: water is 18.02 g/mol, sodium chloride 58.44 g/mol and glucose 180.16 g/mol.
Can I use a stock solution instead of weighing a solid?
Use the dilution calculator for that. This tool works from an amount of solute and a final solution volume, rather than a stock concentration and transfer volume.
Next you might need
More in Chemistry
- Bond energy calculator, private, runs on your device
- Buffer pH calculator, private, runs on your device
- Cell potential calculator, private, runs on your device
- Chemical equation balancer, private, runs on your device
- Chemical equilibrium calculator, private, runs on your device
- Electron configuration, private, runs on your device





