How long would a space elevator ride take, and what is the tether made of?
Climb time to orbit, the tether you would need and how real materials compare, for Earth, the Moon and Mars.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Key values as a table
| Place | Altitude |
|---|---|
| Geostationary orbit | 35,786 km |
| Tether top | 100,000 km |
| Climber | 35,786 km |
Climb time
7 days, 11 hrs
Climbing 35,786 km at 200 km/h. Geostationary orbit is 35,786 km up.
The whole elevator
- Geostationary orbit
- 35,786 km
- Climb time to reach it
- 7 days, 11 hrs
- Speed at the tether top
- 7.76 km/s (escape speed 2.74 km/s)
- Let go above this altitude to escape
- 46,745 km
- Breaking length needed, constant thickness
- 9,880 km
- Breaking length of the chosen material
- 4,940 km
- Taper of the chosen material
- 7.38×
Materials compared
- Steel wire
- 26 km breaking length, taper about 1.2 × 10¹⁶⁵
- Spider silk
- 86.3 km breaking length, taper about 5.1 × 10⁴⁹
- Kevlar
- 255 km breaking length, taper about 6.7 × 10¹⁶
- Carbon fibre
- 399 km breaking length, taper about 5.7 × 10¹⁰
- Carbon nanotube
- 4,940 km breaking length, taper 7.38×
- Graphene
- 5,850 km breaking length, taper 5.41×
What it means
- This material can be tapered into a workable tether: its cross-section grows by 7.38× from the ground to the widest point.
- An ideal tether on the equator with the same stress along its length. Air, weather, the climber's weight and orbiting objects are left out.
Climb time to orbit, the tether you would need and how real materials compare, for Earth, the Moon and Mars.
How to use
- Choose a world, the altitude you want to ride to and the speed of the climber.
- Drag the climber along the tether to change the altitude, and compare the materials below the result.
- Open the extra fields to change the tether's top end and the safety factor.
How it works
A space elevator is a cable from the equator up past the stationary orbit, where one turn of the world takes as long as one orbit. Above that height, the spin pulls the cable outward more than gravity pulls it in, so a weight at the far end keeps the whole cable taut, and a cabin can climb it. The strain is highest at the stationary orbit, where the cable carries everything below it, so the cable is made thickest there and tapers toward both ends.
The stationary orbit is at r = (GM ÷ ω²)^⅓, where GM is the world's gravitational parameter and ω its rotation rate: 35 786 km above Earth's equator and 17 031 km above Mars. A cable of constant thickness needs a specific strength of ΔΦ = GM(1/R − 1/r) − ½ω²(r² − R²), 48.4 MJ/kg for Earth, which is a breaking length (the length of a hanging rope that snaps under its own weight) of ΔΦ ÷ g ≈ 4 950 km. A tapered cable of strength σ and density ρ is e^(ρΔΦ/σ) times thicker at the widest point than at the ground (Pearson 1975). The Moon spins too slowly, so its tether runs to the Earth–Moon L1 point. For example, at 200 km/h the 35 786 km to geostationary orbit takes about 7.5 days.
Steel (about 26 km breaking length) and Kevlar (about 260 km) fail by a huge margin: their taper ratio is astronomical. Carbon fibre (about 400 km) is also far too weak. Only carbon nanotubes and graphene, with breaking lengths of about 5 000 km or more on paper, can work, but so far they exist only as short pieces. The tool treats the tether as ideal and leaves out the air, weather, the climber's weight and orbiting satellites. Material figures are best published or typical values.
Worked example
How long does it take to ride to geostationary orbit?
- The stationary orbit is 35,786 km up; at 200 km/h the ride takes 7.5 days.
- A constant-thickness cable needs a breaking length of 9,880 km (with the safety factor); a nanotube tether would taper by about 7.4 times.
About 7.5 days to go the 35,786 km.
Sources
- NASA: Earth Fact SheetUsed for: reference data
- NASA: Mars Fact SheetUsed for: reference data
- Pearson: The orbital tower: a spacecraft launcher using the Earth's rotational energy (Acta Astronautica 2, 1975)Used for: formula
Frequently asked questions
How high is a space elevator?
To geostationary orbit, 35 786 km above the equator. The cable usually goes farther, often to 100 000 km, so that the weight at the end keeps it taut.
Why can't we build one today?
No material is strong enough for its weight. The cable would need a breaking length of about 5 000 km at constant thickness, or very strong, light fibres such as carbon nanotubes to taper it. Today's best fibres are 10 to 100 times too weak.
How long would the ride take?
At 200 km/h about 7.5 days to geostationary orbit, and about 30 minutes to 100 km. A faster climber shortens it, but then the cable must carry more power.
Could the Moon or Mars have one?
Yes, and it is easier because gravity is lower. Mars needs a cable to its areostationary orbit at 17 031 km. The Moon turns once a month, so its cable runs to the L1 point between the Moon and Earth, about 56 000 km up.
What happens if you let go at the top?
The cable's top moves faster than orbital speed, so a cabin released above about 47 000 km on Earth escapes to the planets. The tool shows the escape altitude and speeds.





