How hard does a spring pull back?
Spring force, stored energy and bounce period from the spring constant, the stretch and the mass, with Hooke's law drawn live.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Spring force
20 N
Stretched 10 cm, a 200 N/m spring pulls back with 20 N and stores 1 J; the mass bounces once every 0.314 s.
Key values as a table
| Stretch (cm) | Force (N) | Energy (J) |
|---|---|---|
| 2.5 | 5 | 0.0625 |
| 5 | 10 | 0.25 |
| 7.5 | 15 | 0.563 |
| 10 | 20 | 1 |
- Stored energy
- 1 J
- Bounce period
- 0.314 s (3.18 Hz)
- Top speed
- 2 m/s
- Stretch from the mass alone
- 2.45 cm
Spring force, stored energy and bounce period from the spring constant, the stretch and the mass, with Hooke's law drawn live.
How to use
- Enter the spring constant in newtons per metre; it is often printed on the spring or its data sheet.
- Enter how far the spring is stretched or compressed, or drag the point along the line.
- Add the mass on the spring to get how fast it bounces; drag the end of the line to try a stiffer or softer spring.
How it works
A spring pulls back harder the more you stretch it, in proportion: twice the stretch, twice the force. This is Hooke's law, F = k·x, where x is the stretch from the rest length and k the spring constant, the force per metre of stretch. A stiff car spring has k in the tens of thousands of N/m, a pen spring a few hundred.
Stretching takes work, and the spring stores it: the energy is the area under the force line, a triangle, E = ½·k·x². A 200 N/m spring stretched 10 cm pulls with 200 × 0.1 = 20 N and stores ½ × 200 × 0.1² = 1 J. Let go with a mass m on it and it bounces with the period T = 2π·√(m ÷ k), the same for any stretch: 0.5 kg on that spring bounces every 2π × √(0.5 ÷ 200) ≈ 0.31 s.
Real springs follow Hooke's law only up to their elastic limit; stretched further they bend permanently. The period assumes a spring much lighter than the mass and no damping. Formulas from OpenStax University Physics, volume 1, sections 15.1 and 15.2 (openstax.org).
Sources
- OpenStax University Physics, vol. 1, §15.1 Simple Harmonic MotionUsed for: formula
Frequently asked questions
How do I find the spring constant?
Hang a known mass on the spring and measure the stretch: k = m·g ÷ x. A 1 kg mass stretching it 5 cm gives 9.81 ÷ 0.05 ≈ 196 N/m.
What is the difference between hanging extension and oscillation amplitude?
Hanging extension is the static stretch caused by the mass’s weight. For a vertical spring’s oscillation, amplitude is the extra displacement from that hanging equilibrium, not from the unloaded length.
What happens with two springs?
Side by side they act like one spring with k₁ + k₂. One after another they are softer: 1 ÷ k = 1 ÷ k₁ + 1 ÷ k₂.
Should I enter compression as a negative extension?
No. Enter the positive size of the displacement. The tool reports the magnitude of force and stored energy rather than a signed force direction.
How do I enter a spring constant given in N/mm?
Multiply it by 1,000 to get N/m before entering it. For example, 2 N/mm is 2,000 N/m.





