Skip to content

How would your photo look as a cut-out stencil?

Turn a photo into a one to three layer stencil with bridges, printed at real size, or as an SVG for a cutting machine.

Stencil workspace

The picture, 240 × 240 pixels

Drag to move it, drag a corner to resize it. Arrow keys move it, Alt + arrow keys resize it; with Shift in larger steps.

240 × 240 pixels, 0 from the left, 0 from the top

Paper
Orientation
Making your stencil…
Layers
Layers

The picture is turned into the stencil on your device and is never uploaded.

Size and bridges
mm

mm

Black is cut away. Print at 100 % (actual size) on stiff paper, card or a stencil sheet. Bridges are 2 mm wide; the crosses in the corners line up the layers.

Turn a photo into a one to three layer stencil with bridges, printed at real size, or as an SVG for a cutting machine.

How to use

  1. Choose a photo, or start from the sample picture. Nothing is uploaded. A bold picture with clear dark and light areas works best.
  2. Move the slider until the black areas show what you want to paint, and choose one to three layers. Open the extra settings to set the stencil width and the bridge width.
  3. Print the pages at 100 % (actual size) on stiff paper or card and cut out the black areas, or download the SVG for a cutting machine.

How it works

A stencil is a sheet with holes: paint goes through the holes and not through the rest. The tool turns your picture into brightness, cuts away everything darker than the limit you set, and keeps the rest as material. With more layers, the first stencil covers the widest area and each later one cuts only darker details, so you paint light to dark and build up shades.

A hole can leave a piece of material floating in it, like the centre of an O. That piece would fall out, so the tool finds every loose piece and joins it to the rest of the sheet with a narrow bridge across the cut. The bridge width is the number of millimetres you choose; wider bridges are stronger and show as thin gaps in the paint. The sheet prints at real size, and the crosses in its corners line up the layers.

Cutting is fiddly at small sizes: very thin bridges and tiny holes tear. Use thicker bridges for paper and thin ones for plastic or metal.

Worked example

How wide is each bridge in cells for a 150 mm stencil?

  1. The picture has 800 cells across plus 8 cells of frame on each side, 816 cells in all.
  2. Each cell is 150 ÷ 816 = 0.18 mm, so a 2 mm bridge is 2 ÷ 0.18 = 10.9, rounded to 11 cells.

A 2 mm bridge is 11 cells wide on a 150 mm stencil.

Method

No outside data is used: the tool works only with what you enter, in your browser.

Sources and methods

Frequently asked questions

Is my photo uploaded?

No. The stencil is made in your browser and the photo never leaves your device.

What are bridges?

Narrow strips of material that hold loose pieces, such as the inside of an O, to the rest of the stencil so they do not fall out when you cut.

How many layers do I need?

One layer gives a two-tone picture. Two or three layers add mid tones and detail: paint the first layer's colour, then add the next stencil over it with a darker colour.

How do I print it at the right size?

Choose Print, set the scale to 100 % or Actual size and turn off Fit to page. Check the stencil width with a ruler.

Can I use it with a cutting machine?

Yes. Download the SVG: it is in real millimetres, with one group per layer and the cut areas as filled shapes.

Why is my stencil smaller than the width I asked for?

The sheet must fit on one page of your paper. Choose a smaller width, a bigger paper or turn the page, or print a larger stencil from the SVG.

Send feedback