How many posts and boards does my fence need?
Posts, rails, pickets and bags of concrete for a straight fence, with gates taken off the run.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
More options
Posts needed
10 posts
19 m of fence in 8 sections.
- Rails
- 24
- Pickets
- 190
- Length of one post
- 2.4 m
- Bags of concrete
- 31
Posts, rails, pickets and bags of concrete for a straight fence, with gates taken off the run.
How to use
- Enter the total length of the fence, its height and how far apart the posts will stand.
- Enter the width of one picket and the gap between pickets, then open More options for rails, gates and the concrete for the posts.
- Read the number of posts, rails, pickets and bags of concrete, and the length to buy for each post.
Materials for a 1.8 m fence with one gate, by fence length
How it works
A fence is a row of equal sections between posts. The gates are taken off the run, and the rest is divided by the post spacing and rounded up to whole sections. A fence of n sections needs n + 1 posts, plus one more for each gate. Every section has the chosen number of rails, and the pickets cover the net length: one picket for every picket width plus gap.
Example: 20 m of fence with one 1 m gate leaves 19 m. With posts every 2.4 m that is 8 sections and 10 posts, counting the gate post, and 8 × 3 = 24 rails. Pickets 9 cm wide with 1 cm gaps need 19 ÷ 0.10 = 190. Each post is 1.8 m of fence plus 0.6 m in the ground. A 0.3 m hole around a 0.1 m post takes about 36 litres of concrete, so ten posts take about 364 litres, or 31 bags of 12 litres.
The calculator assumes a straight fence and a square 100 mm (4 in) post in a 300 mm (12 in) hole. A third of the post length in the ground, and at least 0.6 m (2 ft), is a common rule. Local rules, frost depth and wind decide the real design; for tall fences or poor soil ask a builder or your building authority.
Method
No outside data is used: the result is worked out directly from the formula explained under How it works.
Frequently asked questions
How far apart should fence posts be?
Typically 1.8 to 2.4 m (6 to 8 ft). Closer posts give a stronger fence; many wooden panels and rails are made for 2.4 m.
How deep should fence posts be set?
About a third of the post's length, and at least 0.6 m (2 ft). Tall fences and soft ground need more, and frost depth matters in cold climates.
How many pickets do I need?
Divide the fence length by the picket width plus the gap, and round up. With 9 cm pickets and 1 cm gaps that is 10 pickets per metre.
How much concrete does a fence post need?
A 100 mm post in a 300 mm hole 0.6 m deep takes about 36 litres, around three 25 kg bags. Fast-setting concrete is mixed in the hole and needs no separate mixing.
How do I count the posts at a gate?
A gate hangs between two posts. The calculator takes the gate width off the fence run and adds one post per gate, because the gate opening needs one more post beyond those of the sections.





