Skip to content

How acidic is your solution?

pH, pOH, [H₃O⁺] and [OH⁻] for strong and weak acids and bases, on the pH scale.

pH

2.88

Acidic: pH 2.88 is below 7, the neutral point of water at 25 °C.

Key values as a table
SubstanceTypical pH
This solution2.88
Battery acid0.00
Lemon juice2.00
Coffee5.00
Pure water7.00
Baking soda9.00
Ammonia11.00
Bleach13.00
pOH
11.12
Hydronium [H₃O⁺]
0.00131 mol/L
Hydroxide [OH⁻]
7.64 × 10⁻¹² mol/L
Ionized
1.3%

pH, pOH, [H₃O⁺] and [OH⁻] for strong and weak acids and bases, on the pH scale.

How to use

  1. Choose what you know: a weak or strong acid or base, or one of pH, pOH, [H₃O⁺] and [OH⁻].
  2. Enter its concentration, and for a weak acid or base its pKa or pKb. Pick mmol/L or µmol/L beside the number for dilute solutions.
  3. Read the pH and the other three values, and drag the point along the pH scale to see what concentration gives another pH.

How it works

pH measures how many hydronium ions (H₃O⁺) a water solution holds, on a logarithmic scale: pH = −log₁₀[H₃O⁺], with the concentration in mol/L. Each step of one pH unit is a tenfold change, so pH 3 has ten times the hydronium of pH 4. Water always holds both H₃O⁺ and OH⁻, and at 25 °C their product is fixed, [H₃O⁺] × [OH⁻] = 1.0 × 10⁻¹⁴, so pH + pOH = 14 and pure water sits at pH 7.

A strong acid such as hydrochloric acid ionizes completely, so 0.01 mol/L gives [H₃O⁺] = 0.01 mol/L and pH 2. A weak acid ionizes only partly, by its acid constant Ka (pKa = −log₁₀ Ka): the hydronium x solves x² ÷ (C − x) = Ka. For 0.10 mol/L acetic acid, pKa 4.76, x = 0.0013 mol/L and the pH is 2.88: only 1.3 % of the acid has ionized. Weak bases work the same way with Kb and OH⁻.

The results are for water at 25 °C and treat the solution as ideal, which is close for dilute solutions and drifts above about 1 mol/L. Very dilute weak acids and bases are left out, because water's own ions then set the pH. The everyday substances on the scale are typical values; real lemon juice or bleach varies. Sources: OpenStax Chemistry 2e, chapter 14; USGS Water Science School, pH and Water.

Worked example

What is the pH of a 0.1 mol/L solution of acetic acid (pKa 4.76)?

  1. Acid constant: Ka = 10^(−4.76) = 0.0000174.
  2. Solve Ka = x² ÷ (0.1 − x) for x = [H⁺]: x = 0.00131 mol/L.
  3. pH = −log₁₀[H⁺] = 2.88.

pH 2.88; only 1.3% of the acid ionizes.

Frequently asked questions

Can I calculate the pH after mixing an acid and a base?

No. This tool handles one acid or base, or a known ion concentration. A mixture needs the amounts and volumes of both solutions and any remaining acid-base equilibria.

Can I use the weak-acid mode for a buffer?

No. A buffer contains both a weak acid and its conjugate base in specified amounts. This mode assumes the acid is dissolved on its own.

Can I enter sulfuric acid as a strong acid?

Not as a complete model of sulfuric acid. The calculator handles one ionization step, while sulfuric acid can release a second proton whose contribution depends on concentration.

Can pH be below 0 or above 14?

Yes. Concentrated solutions can give values outside that range, although the ideal concentration model becomes less accurate. Direct pH entry is limited to 0–14; concentration-based results can extend beyond it.

Where do I find the pKa of an acid?

In a chemistry textbook's table of acid constants. Common values: acetic acid 4.76, formic acid 3.75, hydrofluoric acid 3.17, carbonic acid 6.35 (first step) and the ammonium ion 9.25; for bases, ammonia has pKb 4.75.

Send feedback