How much lumber is this, by volume?
Board feet and cubic metres of lumber from the size, length and number of pieces, with the cost.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
More options
Lumber volume
0.103 m³
10 pieces of 45 × 95 mm, 2.4 m each.
- Board feet (nominal size)
- 43.48 board feet
- One piece
- 4.35 board feet
- Total length
- 24 m
Board feet and cubic metres of lumber from the size, length and number of pieces, with the cost.
How to use
- Choose a standard US size such as 2 × 4, or custom and type the thickness and width.
- Enter the length of one piece and how many you need.
- Read the volume in board feet and cubic metres. Under More options, enter a price per board foot, cubic metre or piece to get the cost.
Nominal and actual sizes and the board feet of one 8 ft piece
How it works
A board foot is the lumber trade's unit of volume: a piece 1 inch thick, 12 inches wide and 1 foot long, or 144 cubic inches. For a piece, board feet = thickness (in) × width (in) × length (ft) ÷ 12, and the trade uses the nominal size. A cubic metre is the true volume, which uses the actual size: a 2 × 4 is really 1.5 × 3.5 in once it is planed.
Example: ten 2 × 4s, each 8 ft long, are 2 × 4 × 8 ÷ 12 = 5.33 board feet each, or 53.3 board feet in all. Their actual volume is 0.0381 m × 0.0889 m × 2.4384 m × 10 = 0.0826 m³. At 0.90 per board foot the cost is 48. In metric sizes there is no nominal size, so a custom piece is counted at the size you give.
The table lists common nominal sizes with their actual size from the American Softwood Lumber Standard (PS 20) for dry lumber. Hardwood is sold in rough thicknesses measured in quarters of an inch, and real boards vary a little, so use these figures for estimates and ask the yard for what it sells.
Sources
- Southern Pine Inspection Bureau: Nominal vs Actual Lumber SizesUsed for: reference data
Frequently asked questions
How do I calculate board feet?
Multiply thickness in inches by width in inches by length in feet, then divide by 12. A board 2 in × 6 in × 10 ft is 2 × 6 × 10 ÷ 12 = 10 board feet.
What is the actual size of a 2x4?
1.5 by 3.5 inches (38 × 89 mm) once dried and planed. The nominal 2 × 4 name refers to the size of the rough board before it is surfaced.
How many board feet are in a cubic metre?
About 424, since one board foot is 0.002359737 m³. That counts nominal board feet of the same volume; the real size of planed lumber is smaller.
Why is lumber sold by the board foot?
It lets hardwood of any thickness and width be priced on one scale. Softwood construction lumber is mostly sold by the piece or by the linear foot.
Do I measure board feet with the nominal or actual size?
With the nominal size, as the trade does. The cubic metres here use the actual size, which is what the wood really fills.





