Skip to content

How does the pH change as you titrate?

The pH curve of an acid titrated with NaOH, with the equivalence point and an indicator.

Acid

mol/L

mL

mol/L

mL

pH in the flask

5.36

20 mL of base added, 80% of the way to the equivalence point at 25 mL.

Key values as a table
PointBase added (mL)pH
Start0 mL2.88
Half-equivalence12.5 mL4.76
Equivalence25 mL8.73
Added now20 mL5.36
Equivalence point
25 mL
pH at equivalence
8.73
pH at half-equivalence
4.76
Indicator
Phenolphthalein

The pH curve of an acid titrated with NaOH, with the equivalence point and an indicator.

How to use

  1. Choose a weak or strong acid, and for a weak acid enter its pKa (acetic acid 4.76).
  2. Enter the acid's concentration and volume in the flask and the concentration of the sodium hydroxide in the burette.
  3. Enter the volume of base added, or drag the point along the curve, and read the pH, the equivalence point and an indicator to use.

How it works

In a titration you add a base of known strength to an acid until the base has exactly used up the acid: the equivalence point. The amount of base needed tells you the amount of acid, since moles of acid = concentration × volume. With equal concentrations of a monoprotic acid and sodium hydroxide, the equivalence volume equals the acid volume.

The pH climbs slowly at first, then jumps steeply near the equivalence point. For a weak acid such as acetic acid the start is less acidic, and halfway to equivalence half the acid has turned into its conjugate base, so the pH equals the pKa. At equivalence only the conjugate base is left, which makes the solution slightly basic. For 25.00 mL of 0.100 mol/L acetic acid (pKa 4.74) with 0.100 mol/L NaOH, the pH is 2.87 at the start, 4.74 after 12.50 mL and 8.72 at the equivalence point, 25.00 mL.

An indicator changes colour over its own pH range, so the right one changes within the steep jump: phenolphthalein (8.2 to 10.0) for a weak acid, bromothymol blue (6.0 to 7.6) for a strong one. The curve is solved from the full charge balance for a monoprotic acid at 25 °C, treating the solutions as ideal. Sources: OpenStax Chemistry 2e, section 14.7; LibreTexts Chemistry, Acid-Base Indicators.

Worked example

What is the pH after 20 mL of 0.1 mol/L base is added to 25 mL of 0.1 mol/L weak acid (pKa 4.76)?

  1. Equivalence point: 0.1 × 25 ÷ 0.1 = 25 mL of base.
  2. Before it, the acid and its salt form a buffer: pH = pKa + log₁₀(20 ÷ 5) = 5.36.

pH 5.36; the equivalence point, at 25 mL, lies at pH 8.73.

Frequently asked questions

Is an indicator’s endpoint exactly the equivalence point?

Not necessarily. The endpoint is the colour change you observe; equivalence is the stoichiometric balance. Choose an indicator whose transition lies in the steep part of the curve to keep the difference small.

Why is the pH not 7 at the equivalence point of a weak acid?

At equivalence the weak acid has become its conjugate base, for example acetate, which takes protons from water and makes a little hydroxide. The solution is then slightly basic, about pH 8.7 for 0.1 M acetic acid.

Why do my acetic-acid pH values differ slightly from the example?

Check the pKa as well as both concentrations and volumes. The worked values here use pKa 4.74; entering 4.76 gives slightly different pH values.

Which indicator should I use?

One whose colour change falls inside the steep part of the curve around the equivalence pH: phenolphthalein for weak acids with a strong base, and bromothymol blue, methyl red or phenolphthalein for strong acids, since their jump is very wide.

Can I use this for sulfuric acid or a weak-base titration?

No. This tool models a monoprotic acid reacting with a strong base. Acids with several dissociation steps and weak-base titrants need a different model.

Send feedback